dei556u on corolla 2005
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=109967
Printed Date: July 09, 2025 at 7:34 PM
Topic: dei556u on corolla 2005
Posted By: krzysiek033
Subject: dei556u on corolla 2005
Date Posted: December 22, 2008 at 9:55 PM
Hello. I'm installing remote starter on my 2005 Corolla and I bought DEI556U bypass. Can you tell me how should I install this bypass. I would prefer do this without this ring. I man there is 3 types of installation in the manual. One with the ring and 2 without the ring only by connecting to some factory ring cables. Can you tell me what colors are those cables in my car. Or is it even possible to install this without this aftermarket ring-thing.
THANKS
Replies:
Posted By: tj durham
Date Posted: December 22, 2008 at 11:09 PM
Just throw the ring around the cylinder its cake and done
Posted By: Mike M2
Date Posted: December 23, 2008 at 6:34 AM
I don't think you can on Toyota's, the ring is needed unless you get another bypass that doesn't need a key at all. Be sure to close the ring up smaller and get it as far out on the key cylinder as possible. I personally remove the coiled black plastic that's over the ring and twist the ring wires a little to keep them together. Then i place the ring up against the factory ring.
-------------
Mike M2
Tech Manager
CS Dealer Services
|