how to program autostart as 2461tw fm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=109974
Printed Date: July 09, 2025 at 7:41 PM
Topic: how to program autostart as 2461tw fm
Posted By: jdw1407
Subject: how to program autostart as 2461tw fm
Date Posted: December 22, 2008 at 11:02 PM
Hey guys, im new here. hoping to learn lots.
Does anyone know how to program the autostart AS-2461TW-FM. long story shorter... my unlock button on the remote did unlock all my doors, now it just does the driver door, anyone know how to change this back?
Replies:
Posted By: muaiad97
Date Posted: December 23, 2008 at 8:46 PM
Posted By: jdw1407
Date Posted: December 23, 2008 at 9:30 PM
06 Toyota tacoma
Posted By: moonliter
Date Posted: December 23, 2008 at 11:30 PM
see your install manual on pg 2 : select option 3 ( single lock pulse and 2 unlock pulse ) from mode 1 function 4.
Posted By: jdw1407
Date Posted: January 04, 2009 at 6:04 PM
I understand how to select mode and what option, but how do you know what function you are on? just with the function button on the remote?
Posted By: sparkie
Date Posted: January 04, 2009 at 6:36 PM
Read the manual again. Flash the hoodpin and press and hold the brake pedal. Press the lock button for Mode 1. You can know start programming each function within this mode. Release the brake pedal. Use the lock button for option 1, unlock for option 2, trunk for option 3 and start for option 4 for each of the functions within Mode 1. The parking lights will flash the same number of times as which option you have chosen. Once Mode 1 is programmed, the parking lights will come on again. Hold the brake pedal while pressing the unlock button. This will put you into programming of Mode 2. Use the remote buttons to program each function within this mode. Do the same for Mode 3 & 4. Press the brake pedal down after Mode 4 is done and hold both the lock and unlock buttons down together to get into Tach programming.
-------------
sparky
Posted By: jdw1407
Date Posted: January 04, 2009 at 6:56 PM
Im sorry if i sound really dumb for this and thank you for all of your help, I read it again and just says "after selecting the function, press one of the corresponding buttons to select the option." No where does it say what function I am in.
Posted By: jdw1407
Date Posted: January 04, 2009 at 8:13 PM
So it turns out that when they installed it they didnt even bother to put in a hood switch, I think i'll have to take it back and have them do it. thanks for your help
|