Print Page | Close Window

reseting alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=110100
Printed Date: July 12, 2025 at 10:38 AM


Topic: reseting alarm

Posted By: shby1
Subject: reseting alarm
Date Posted: December 27, 2008 at 8:59 PM

Hi. I have a Viper 5701 installed in a 1989 BMW 535i (e34).

My 2-way remote was failing (it would "hesitate" upon button pressing) so I deleted the remotes, figuring that if I "taught" them the routine again maybe the problem would be fixed.

Ok, I deleted the remotes, Tried to "teach" them again and no luck. After reading carefully the whole manual it says "the remotes can only be taught once". Come on, do I have 2 unusable remotes?

1) If I master reset the alarm, can I program the remotes again?
2) How do I reset the alarm? Is there a way to manually do it or do I need to use a Bitwriter?



Replies:

Posted By: calijtee1
Date Posted: December 27, 2008 at 11:52 PM

you have to reset all the transmiters. then start from the begining only thing in doing this you have to program every button on the remote.



-------------
installers do it best. we got the magic hands!


Print Page | Close Window