compustar going into valet each start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=110115
Printed Date: July 04, 2025 at 2:02 PM
Topic: compustar going into valet each start
Posted By: codyb76
Subject: compustar going into valet each start
Date Posted: December 28, 2008 at 11:38 AM
Hi, I'm new to this forum. I just installed a compustar starter in a 2005 Toyota Matrix. Install went smoothly, tach learn etc no problem. The only issue that I can't seem to figure out is that it goes into valet mode each time i start the car with the key. I do have a Blade transponder, that seems to work fine. If I put it in and out of valet the remote start works perfectly. It seems like it resets each time on its own. I have double checked all connections, and my ground is good. I must be missing something, but just can't seem to put my finger on it. The battery is original, seems good. I don't have a tester here to load test it at the moment.
Replies:
Posted By: codyb76
Date Posted: December 28, 2008 at 2:45 PM
Double checked everything. I am going to talk to my supplier tomorrow. I can't find anything wrong at all. It would appear to either be a module problem or a programming issue. I can't find anything related to options that might cause it to default to valet without any input telling it to. Seems like an odd module glitch to me though, because it does work properly once put in and then out of valet mode. I have found different valet issues by searching but none like this one. Would love any advice before I return to my supplier. thanks in advance.
|