2008 vw jetta wiring remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=110125
Printed Date: July 12, 2025 at 8:32 AM
Topic: 2008 vw jetta wiring remote start
Posted By: stangs400
Subject: 2008 vw jetta wiring remote start
Date Posted: December 28, 2008 at 4:53 PM
Hey does anyone have the correct wiring diagram for the 08 VW Jetta? I have the one from an 07 but when I go to test the yellow and red wire under the column, the both show 3.6v with the ignition on, and nothing with the ignition on. The red start wire also does nothing when I try to actually start the vehicle. Any help is much appreciated. Also, this is for just a remote start, no lock or unlock functions needed.
Replies:
Posted By: stangs400
Date Posted: December 30, 2008 at 12:33 PM
Posted By: t&t tech
Date Posted: December 30, 2008 at 7:02 PM
hmmm, i learned this from howie, they're data at the switch, you'll have to go lower down on the wires. i think, where u at howie.
-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF.
PSALMS 37:5
Posted By: Velocity Motors
Date Posted: December 31, 2008 at 11:47 AM
On the new VW Jetta's there is a bunch of wires that exit at the base of the black box with the warning sticker. Also, you will need to use a interface to control OEM alarm and disarm functions. I highly recommend the iDatalink ADS-DL-CA for this. This will take care of all your inputs and outputs required for remote starter, security & keyless all in one. Takes 2 hours off your install time and makes the job alot easier ( less hair pulling ).
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: howie ll
Date Posted: December 31, 2008 at 12:14 PM
It's 6:15 pm here and your inbox is now full-up, Jeff
|