door lock actuator wiring, 92 mazda femilia
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=110173
Printed Date: May 16, 2024 at 3:04 PM
Topic: door lock actuator wiring, 92 mazda femilia
Posted By: bradilz
Subject: door lock actuator wiring, 92 mazda femilia
Date Posted: December 30, 2008 at 1:03 AM
I am conecting my alarm to my locking to give me keyless entry in my 1992 mazda femilia sedan.I have a 2 wire actuator but i am gathering i may need a 5 wire.any help much apreciated.cheers
Replies:
Posted By: i am an idiot
Date Posted: December 30, 2008 at 5:48 AM
Are they aftermarket actuators? If not do you have any idea what they call that vehicle in the U.S.?
Posted By: KarTuneMan
Date Posted: December 30, 2008 at 7:57 AM
Protoge If it's TRULEY built like the Protoge, you need 1 actuator to trigger the latch in the drivers door. A 2 wire will work just fine! See the diagram in the relay section on this web site! -------------
Posted By: CutDog504
Date Posted: December 30, 2008 at 10:06 AM
Yeah, I hate them ol' switchless Mazda locks.....
Posted By: bradilz
Date Posted: December 30, 2008 at 2:10 PM
year protege or sumthin like that.Yes it is a aftermarket 2 wire actuator. I hooked it up like the "actuators/reverse polarity diagram" last week and when I hooked the last wire on the relay it blew a fuse in the engine bay. Duz that mean i need to change some wires around?
Posted By: howie ll
Date Posted: December 30, 2008 at 3:29 PM
No it means you wired the relays wrong what are the lock unlock wires doing, describe them, what's the alarm etc. Should be (if two wire lock output from alarm) assuming they are neg. going, lock to 85, 12V+ to 86 and 87, 87a to ground and 30 to lock wire on motor, unlock wired the same to 2nd. relay with 30 to unlock wire. If there are more than 2 loc/unlock wires on your alarm, let us know.
Posted By: bradilz
Date Posted: January 01, 2009 at 3:01 PM
Yep thats exactly how ive got it hooked up.Its only when i hook the ground wires up that it sparks if i leave them off you can hear the relay clik but no action with the motor.Do i need to put a diode on each of the grounds? By the way alarm is a alpine 8045 and yep has 2 wires 1 lock and 1 unlock.
Posted By: bradilz
Date Posted: January 07, 2009 at 9:05 PM
anybody come acros this before?
|