2008 mitsubishi galant traction control

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=110242
Printed Date: May 13, 2025 at 5:55 AM

Topic: 2008 mitsubishi galant traction control

Posted By: donkim
Subject: 2008 mitsubishi galant traction control
Date Posted: January 01, 2009 at 8:51 PM

Wondering if its possible to add this? Its an option on the Galant but ours doesn't have it. The car has abs brakes, so the wheel speed sensors are already there. The car uses a drive by wire throttle so thats already controlled by a processor. There's a blank plug where the traction control disable switch would be and the wiring for the switch is behind this plug. I assume I would need a different ecu module. Probably cost prohibitive, just thought I would ask.

Replies:

Posted By: howie ll
Date Posted: January 02, 2009 at 4:56 AM

Engine management, ABS and gearbox software/unit changes, Mits dealer quoted me £200 ($400 at then exchange rate) for a water pump and alternator drive belt, got them at a factor for £50!!!!! Do you really want to go there?

Print Page | Close Window