99 grand am, avistart 4103

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=110304
Printed Date: May 13, 2025 at 8:37 AM

Topic: 99 grand am, avistart 4103

Posted By: islandersfan5
Subject: 99 grand am, avistart 4103
Date Posted: January 03, 2009 at 8:23 PM

Hey I'm installing a AviStart 4103 with a GMDLBP kit in my wife's car...a 99' grand am no keyless entry. I like to know the best way to wire the power door locks with this combo thanks for your help.. Joey

Replies:

Posted By: mricicle
Date Posted: January 04, 2009 at 12:43 PM

theres only two ways you can do it... you can see if the module you have can control the door locks.. if not you have to do it the old fasion way.. there is no best way...

Posted By: chriswallace187
Date Posted: January 04, 2009 at 4:38 PM

Ditto - you might get lucky and find out the car originally had keyless entry and the remotes were lost(assuming you bought it used). As mricicle says, the GMDL-BP may end up operating the locks when programmed to platform 2.

You could leave the blue and green wires to it alone and try shorting them to ground to verify this once you've got 12v constant, ground, and data connected on the GMDL-BP.

-------------
C Renner's Auto Electronix
My service is cheap, quick, and good - pick any two

Print Page | Close Window