python1400xp, 1999 ford f 150

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=110418
Printed Date: April 29, 2024 at 11:38 AM

Topic: python1400xp, 1999 ford f 150

Posted By: bansheebrother
Subject: python1400xp, 1999 ford f 150
Date Posted: January 06, 2009 at 8:30 PM

Iam installing a python 1400xp on a 1999 ford f-150 extended cab 4x4 5.4. Was wondering if anyone coud tell me if I need a bypass module or anything else to d the install? also could use sme help with a wiring diagram too please.

Replies:

Posted By: i am an idiot
Date Posted: January 06, 2009 at 9:34 PM

https://www.the12volt.com/installbay/alarmdetail/875.html

Posted By: ervie
Date Posted: January 06, 2009 at 10:11 PM

Yes you need a bypass XK04

Posted By: chriswallace187
Date Posted: January 06, 2009 at 11:57 PM

If your key looks like this:
posted_image

then you need a bypass.

If it looks like this, then you don't need a bypass.
posted_image

-------------
C Renner's Auto Electronix
My service is cheap, quick, and good - pick any two

Posted By: chriswallace187
Date Posted: January 07, 2009 at 12:10 AM

Ok, I don't know why the first image wouldn't load. Here's the link to where I got it - this key does have a transponder and you'll need a bypass if yours looks like it.

-------------
C Renner's Auto Electronix
My service is cheap, quick, and good - pick any two

Posted By: another-kelly
Date Posted: January 07, 2009 at 12:17 AM

got ya chris,

if it looks like this key then yes you need a bypass:

posted_image

Posted By: bansheebrother
Date Posted: January 17, 2009 at 9:40 PM

I installed a python 1400xp with remote start. I got everything wired except for the tach wire couldn't find it and the immobilizer got the xk04 . Could some one please help me the truck will crank but not turn over , any help would be greatly appreciated.

thanks

Posted By: bansheebrother
Date Posted: January 25, 2009 at 2:48 PM

I got it all done and the truck will just crank and not start any Ideas what it could be? Any help would be appreciated.

Print Page | Close Window