viper 5000 2 way recognition

well my buddy danny he's on this site also not sure if his name is the same but possibly single slam 12   .. just installed my viper 5000 i found on craigslist and were having a problem getting anything through the transmitter to the brain we tried the relearn that was posted on here nd once nd only once u got the led to blink like 3 times nd nothing again we tried 4 a couple hours any tips or ideas .. i'm going to call the kid i got it from again tomorrow but we didn't seem like much help ... try to find out if it was writin in w/ a bitwriter. he said that mayb it lost the recognition from being unhooked?? u guys ever heard of that ..

o yea i'm new to the site ppl call me caz nd thank you 4 ur help hope i can give back to the community :)

Welcome here. What procedure are you using, exactly?

Try keep your writing to at least semi-proffessional level. Using letters as synonyms for words, can be mistaken for something else, as we are not IM'g here.

-------------
Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.
Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?
Moral - Never dismiss the obvious.

i'm sorry about that i get it from the other forums i'm on ... and i'm using the procedure from the manual that was posted on here i found when i was searching

First, I would program 1 remote you already have using the instructions at the bottom of page 29. Select AUTO/LEARN. You must have your door trigger wire conneted to operate this routine.

Second, starting the routine over again and using that remote, select Delete All Transmitters. Then go back and relearn the remote and any extra remotes you want controlling the system.

This will make sure there are no unauthorized remotes programmed.

-------------
Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.
Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?
Moral - Never dismiss the obvious.

the thing is i'm not sure if i'm getting anything from the valet/program button besides the one time the l.e.d. blinked we had nothing is there a way to see if the valet button is good besides trying to track down and buy another one? since its 11 0clock i don't need the siren going off tonight if i can get it to work so i'll try the delete then relearn tomorrow

Ok.. You might want to re-read my reply. I was updating it when you replied. Remember, the door trigger must be connected, from the alarm.

-------------
Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.
Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?
Moral - Never dismiss the obvious.

the door trigger i hooked up but i'm bout to say f- it nd go try the delete relearn now any ways

You need to learn first, then delete, and finally relearn.

-------------
Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.
Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?
Moral - Never dismiss the obvious.

is there a way to edit my posts or do i have to wait a certain amount of time /post ? i see on the bottom it says i can't j/w y ?

50 posts or more.

-------------
Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.
Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?
Moral - Never dismiss the obvious.

loneranger wrote:

---

You need to learn first, then delete, and finally relearn.

---

ok i'll try tomorrow and i'll post my results thank u for the advice

ok so in less words


-----learn-------
1. open door (keep open)
2. turn key on.
3. press valet button once
4. press nd hold until i hear siren watch l.e.d. blink
-----delete-------
1.hit the valet button 11 times
2.press and hold valet until siren and led blinks 11 times .
-------

then to relearn repeat steps 1-4

i'm just trying to clarify so i dont' do it wrong then buy a diff. alarm when this is a good one

Each step must be completed within 15 seconds.

Learn:

• 1. Open the driver's door.
• 2. Turn the key to ignition.
• 3. Press and release the valet button once, then press and hold.
• 4. The siren will chirp and the LED will blink the number of times corresponding to the channel that is accessed.
• 5. While still holding the valet button, press and release the remote lock button once.
• 6. Release valet button.
• 7. Turn ignition switch off.

Delete:

• 1. Open the driver's door.
• 2. Turn the key to ignition.
• 3. Press and release the valet button 11 times, then press and hold.
• 4. The siren will chirp and the LED will blink the number of times corresponding to the channel that is accessed.
• 5. While still holding the valet button, press and release the remote lock button once.
• 6. Release valet button.
• 7. Turn ignition switch off.

Relearn:

• While refering to learn sequence above, exit sequence before learning each new remote.

-------------
Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.
Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?
Moral - Never dismiss the obvious.

so i think i found my problem thank you alot .. ahhh we never turned ignition back off within 15 seconds so hopefully it works .   if i didn't break my map sensor i'd take it down the road and try it

Well, I don't think that was your problem. It will usually exit at step 6. I think step 5 was your problem.

-------------
Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.
Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?
Moral - Never dismiss the obvious.

yea that most likely 2. i think we got to step 4 and then the manual jumped to the channel 11 thing must have thrown us off

I would also reccommend that you go through all the menu features and set them manually. Before you operate the remote start, follow the tach learn procedure. I've also heard that the delete all transmitters function doesn't always work. The best advice is to learn the first remote 4 times and then learn each successive remote once.

-------------
Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.
Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?
Moral - Never dismiss the obvious.

no remote start here ... my e brake is bad in my 5 speed and my friends dad had one on a van it used to start then run then turn off all the time on its own .. i'm all set lol but i do believe either the starter kill or ignition kill is hooked up .. i dunno though because my car starts . maybe because i can't arm the alarm?

Again, I edited while you were replying.

-------------
Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.
Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?
Moral - Never dismiss the obvious.

doitpropa wrote:

---

no remote start here ... my e brake is bad.. i'm all set lol but i do believe either the starter kill or ignition kill is hooked up .. i dunno though because my car starts . maybe because i can't arm the alarm?

---

Does the LED, siren, horn, or parking lights flash? Do you get one long chirp when trying to enter learn? If so, it's BitWriter locked.

-------------
Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.
Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?
Moral - Never dismiss the obvious.

i'm getting siren only my horn was never hooked up when i got the car the led isn't flashing and either are the parking lights..


but we had it flash once when i got mad nd flipped the key a bunch of times       so i know the l.e.d works it just won't blink now unless the connection is broken like were the wires go to it



the alarm is in a 93 civic cx if it makes any difference

[/QUOTE]

Does the LED, siren, horn, or parking lights flash? Do you get one long chirp when trying to enter learn? If so, it's BitWriter locked.

[/QUOTE]

no it was a short chirp

Do you get one long chirp when the ignition is turned off, exiting learn?

-------------
Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.
Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?
Moral - Never dismiss the obvious.

i didn't because i never fully went through the process .. but after u push the valet button once /or once nd hold i was gettin a short chirp

i didn't really answer ur ? i never fully did the process so no when i turned the key off i had nothing

Hmm...

So you haven't gone through the procedure completely yet?

-------------
Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.
Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?
Moral - Never dismiss the obvious.

nah man i said i realized that way up on the thread and its like 130 in the a.m. i can't go out and have my alarm chirping away .. lol or worse have it go off my pops probably wouldn't be to happy about that

Ya. I read it but, I thought you were gonna f' it and try anyway. Well, good luck with it later today.

-------------
Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.
Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?
Moral - Never dismiss the obvious.

thank you and i'll post wut happens later today

hey man i owe ya big .. i got it to work it arms and disarms now .. only thing is my lights dont' blink and i couldnt get the hood trigger to work right i'm gonna mess around with it somemore   tomorrow

Well at least it squeals. - - - Here piggy piggy! - - -

-------------
Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.
Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?
Moral - Never dismiss the obvious.

yea man its deff betta than what it was