Print Page | Close Window

clifford 50.7x in ranger 2004 4.0

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=110557
Printed Date: May 21, 2024 at 6:10 AM


Topic: clifford 50.7x in ranger 2004 4.0

Posted By: grg_p
Subject: clifford 50.7x in ranger 2004 4.0
Date Posted: January 11, 2009 at 1:55 PM

Installing remote starter and alarm clifford 50.7x with DEI 556sw transponder .Getting a lot of different definitions for the same wires on different web sites. Any help would be great.



Replies:

Posted By: loneranger
Date Posted: January 11, 2009 at 4:02 PM
What wires are you speaking of?

-------------
Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.
Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?
Moral - Never dismiss the obvious.



Posted By: grg_p
Date Posted: January 12, 2009 at 8:41 AM

constant 12v = red

Ignition 1 = pink , input fused (30A) red

Ignition 2 = pink/white, input fused (30A) RED / white

accessory = orange, input fused (30A) RED / black

12-pin black (-) chassis ground

neutral safety switch input BLACK/ white (-) chassis ground

have no led light? checked power and ground at plugs


Print Page | Close Window