how to remove keyless entry camaro

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=110567
Printed Date: May 17, 2024 at 8:26 PM

Topic: how to remove keyless entry camaro

Posted By: gmc92sierra
Subject: how to remove keyless entry camaro
Date Posted: January 11, 2009 at 7:10 PM

I just got a new alarm and what my question is ... How do I remove the keyless entry it has now?

Thanks in Advance.

Replies:

Posted By: myinstallguy
Date Posted: January 11, 2009 at 7:22 PM

If its the manufacturers equiptment you don't.

If its an aftermarket product remove wire by wire when you install the new one. Chances are you'll need to connect the new one to some of the same circuits the old one is tapped into.

Give us a hint as to whats in the car now.

-------------
*Installer since '89*

Posted By: gmc92sierra
Date Posted: January 12, 2009 at 11:01 AM

It's the manufacturers, it came with the car brand new back in 1995. It's a 95 Camaro 3.8l V6. Oh, and on the remote it has trunk release. So the keyless entry and trunk release.

What your telling me is... leave it alone? So how am I to connect over these? Is there a way of bypassing these?

Posted By: loneranger
Date Posted: January 12, 2009 at 2:58 PM

You don't need to worry about the factory K/E. Put the remotes away and install your new equipment.

-------------
Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.
Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?
Moral - Never dismiss the obvious.

Print Page | Close Window