Door Locks 2002 Focus

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=11058
Printed Date: May 17, 2024 at 4:50 PM

Topic: Door Locks 2002 Focus

Posted By: mb44197
Subject: Door Locks 2002 Focus
Date Posted: March 18, 2003 at 12:48 AM

I've got here a 2002 Focus ZX3 WITHOUT factory power door locks. I would like to get power locks installed along with a keyless entry/alarm system. The problem is the locks... The locking mechanism runs on a cable that looks alot like the cable used in a bicycle brake cable. The cable snakes from about midway in the door to the rear where it's attached to the actual lock. Is there any way to use an aftermarket actuator? In not, how is it possible to wire up a factory actuator? Help from any of you guys who know how to do this stuff would be REALLY appreciated. And please, if you need any more info, or even pictured for that matter, I'd be happy to oblige.

Replies:

Posted By: Jazz3D1
Date Posted: March 19, 2003 at 1:48 PM

I have never encountered this type of installation, but it sounds like you will need to get creative. Does the cable actually move when locking and unlocking the doors? or does it appear like there is something in the cable that controls the door locks?

If the cable actually moves, then you may be able to use the metal rods that come with the aftermarket actuator. If not, you could likely peel back the insulation that protects the cable to see exactly what's inside.

A pic would be helpful, let me know if you have one.

Jazz3D1@excite.com

-------------

Posted By: Car-Stuff
Date Posted: March 19, 2003 at 3:08 PM

In a situation like this, I look to drill a small hole in one of the levers on the door lock mechanism and use this to attach my rod from my door motor.

Never done a Focus though...

Nick

Posted By: mb44197
Date Posted: March 30, 2003 at 8:01 PM

I think I have it figured out. I'll see if I can get it working and let you guys in on some pics. Thanks for your assistance.

-Mike

-------------

Posted By: mb44197
Date Posted: March 30, 2003 at 8:02 PM

I think I have it figured out. Maybe I can get some pics in the process. Thanks for your assistance guys.

-Mike

-------------

Posted By: mb44197
Date Posted: March 30, 2003 at 8:03 PM

Oops. Thats what you get when you figure the error message didnt post

-------------

Posted By: cpgoose
Date Posted: May 05, 2003 at 11:40 AM

Did you get some pictures taken? I'm curious :-)