Buying Acc. For Alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=11074
Printed Date: August 27, 2025 at 10:51 PM

Topic: Buying Acc. For Alarm

Posted By: Anthony1
Subject: Buying Acc. For Alarm
Date Posted: March 18, 2003 at 11:23 AM

Just wondering , I am going to buy pin switches etc for my alarm. It is a dei rattler 300. Do I have to but sencer etc for this particular model or will any parts work???

Replies:

Posted By: essey98
Date Posted: March 18, 2003 at 3:22 PM

my viper basically work on pulses from the sensors, which basically means that any accessory capable of outputting a pulse would work. Because they're both dei, I'm pretty sure it would be the same. You might want to buy a viper sensor for the main trigger zone/s as it requires a special harness (unless you can get access to only the wire harness) but the secondary zones just use wires so any sort of sensor should do....

Print Page | Close Window