2006 dodge ram cruise control prob after

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=110775
Printed Date: July 03, 2025 at 4:24 PM

Topic: 2006 dodge ram cruise control prob after

Posted By: newman2ng
Subject: 2006 dodge ram cruise control prob after
Date Posted: January 18, 2009 at 1:07 PM

Installed a galaxy 1900rs in a 2006 dodge ram diesel. Eveything went good and the start works great when the customer left he said that the squares around the shift Indicators in the dash only lit up in park and nuetral. On his way home he said he tried the cruise control and it wouldn't work. Just before getting home his check engine light came on. Is this something with the remote start? I used a pkuch2gx which I use on all newer dodges and have never had a problem like this. Any pointers? Thanks

Replies:

Posted By: 12vstunna
Date Posted: January 18, 2009 at 1:15 PM

tell me what wires you grabbed xactly i think i can help you

-------------
WHO NEEDS M.E.C.P ITS JUST A CERTIFICATE,OH AND I GOT THE SKILL TO PROVE THAT I DONT NEED ONE~XxX12vStunnaXxX~ X-Mobile Solutions

Posted By: newman2ng
Date Posted: January 18, 2009 at 3:15 PM

Power at ign harness
Start. At ign harness. GREEN/ YELLOW+
Ignition at ign harness. Pink/white+
Mux wire at ign harness. PURPLE / brown-(from bypass)
Brake. At pedal. White tan+
Parking lights at harness. WHITE/ green-1130 resistor through relay
Thanks

Posted By: 12vstunna
Date Posted: January 18, 2009 at 3:26 PM

im sure your prolem is power i think i had that problem when they first came out only my install went worse i ble out the computer so well now im gonna help you out

12 volt -12ga ORANGE / red in connector next to parking brake yes thats correct the parking brake

ign. pink white at ignition harnes

starter GREEN/ YELLOW

o it looks like all your wire is cool but power try that and unplug the battery and well it should fix your problem its funny but that wire at the ign harnss is a no no on dodge,for som reason dodges are picky on the way they like to be touched so do as i said and you should be good

-------------
WHO NEEDS M.E.C.P ITS JUST A CERTIFICATE,OH AND I GOT THE SKILL TO PROVE THAT I DONT NEED ONE~XxX12vStunnaXxX~ X-Mobile Solutions

Posted By: 12vstunna
Date Posted: January 18, 2009 at 3:29 PM

oh and lights use same wire but give it 3.3k ohm resistor (negative lights)oh and if alarm has negative output on lights remove relay its realy not needed

-------------
WHO NEEDS M.E.C.P ITS JUST A CERTIFICATE,OH AND I GOT THE SKILL TO PROVE THAT I DONT NEED ONE~XxX12vStunnaXxX~ X-Mobile Solutions