Print Page | Close Window

06 dodge 3500, remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=110854
Printed Date: July 14, 2025 at 6:56 PM


Topic: 06 dodge 3500, remote start

Posted By: paul h
Subject: 06 dodge 3500, remote start
Date Posted: January 20, 2009 at 10:55 PM

OK..working with a Dodge 3500 truck, diesel.  Wiring diagram is showing a (-) PURPLE / brown that is a second starter wire and is negative trigger thru an 180 ohm resistor and say must use a relay.  No problem on the relay part....BUT this is what confised me!  Wiring also shows the Accessory is the same as the second starter wire above and shows it is a negative trigger thru a 610 ohm resistor and also must use a relay.

My question is this....can I make 1 tap off this PURPLE / brown wire, run my resistors off that tap and then to the relays??  Essentially...its the same as making 2 separate taps, correct?? 

Fill me in if I'm wrong!!  And thanks in advance for the help!




Replies:

Posted By: ckeeler
Date Posted: January 21, 2009 at 10:15 AM
Thats correct.


Print Page | Close Window