Print Page | Close Window

prostart ct 3471 wi ith idatalink problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=110859
Printed Date: May 17, 2024 at 1:27 PM


Topic: prostart ct 3471 wi ith idatalink problem

Posted By: jim_wrench
Subject: prostart ct 3471 wi ith idatalink problem
Date Posted: January 21, 2009 at 2:15 AM

Been installing for quite some time now and have had neumerous problems with GMs

Have a 2007 Pontiac G5 with the CT-3471 and went ontot he idatalink site and picked up the ads-dlsl GM bypass unit for what ;looked to be ease of installation. Ha Ha was i wrong....

Cannot get the idatalink to learn the vehicle there really is only 2 wires to hook up then the main harness to the remote start module.

i reset the unit 3 times to no avail, once the alarm sounded upon start and when the alarm sounded about 5 times the car started.... but never have the door locks worked. looks like a pretty simple way to comunicate with the BCM but do they work?

I have attempted all three bypass options (ADS, Triogix, Fortin) as well as the one way and two way bypass type.

Car does not crank dash lights light up and go out then reilluminate again as supposed to do with this type of system to allow the crank to happen but during this the theft light is on solid.

Any help with this so i can have a happy customer :D




Replies:

Posted By: chadwa2003
Date Posted: January 21, 2009 at 11:12 AM
What 2 wires have you hooked up on the idatalink module there are more then 2 connections and you have to cut 2 wires. I would recommend you start fresh with the idatalink module and verify all your wires are correct and then start reconnecting them


Print Page | Close Window