Print Page | Close Window

window control module

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=111051
Printed Date: July 03, 2025 at 11:50 AM


Topic: window control module

Posted By: eddie357
Subject: window control module
Date Posted: January 27, 2009 at 4:17 PM

i have a question i want to use a window control module to control a actuator looking at the crimestopper cs-5601 module where you normally cut the window switch to install the module between the motor and switch is it possible to just install the module directly to the motor/actuator.

-------------
Eddie N. Barnes



Replies:

Posted By: howie ll
Date Posted: January 28, 2009 at 9:41 AM
Yes but you still have to cut the motor wires , you're a bit vague but can I assume you are trying to do without a switch? If so you will still need to connect the switch sides to ground.



Posted By: eddie357
Date Posted: January 28, 2009 at 10:21 AM
yes, i am trying do away with the door switch.

-------------
Eddie N. Barnes


Print Page | Close Window