Print Page | Close Window

06 chevrolet aveo bypass wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=111075
Printed Date: May 15, 2025 at 9:44 AM


Topic: 06 chevrolet aveo bypass wiring

Posted By: oneohm
Subject: 06 chevrolet aveo bypass wiring
Date Posted: January 28, 2009 at 12:52 PM

2006 Chevrolet Aveo. Remote Start Install.

According to DEI, the car has a Transponder based key. They recommend a multitude of bypass modules that require the key be inserted into the bypass. The alternate is the 100F reprogrammed. The customer only has one key. I have a 556G bypass that I want to install. Looking at the ignition, there is two wires to the front going to the keysense switch (2-pin harness red and black going to a 12v power (orange) and keysense detect (light green)). The second set of wires goto the detector coil on the rear portion of the cylinder, with 4 volt Data pulse detected (2-pin harness red and black wires connecting to a white wire and another color (sorry forgot)).

I want to use a 556G. The 556G has the two pink wires for the data coil, along with a purple data wire and a green keysense.

If I connect this bypass, will I still need to connect the purple data wire and if so to what? I known the pink wires will go to the coil and the green keysense wire will go to the light green keysense wire of the vehicle.

Purple anyone?




Replies:

Posted By: oneohm
Date Posted: January 30, 2009 at 7:25 PM
I answered my own Question. The 2006 Aveo uses Passkey 3 but the system is version 2. So the correct bypass module is a PKALL. An 1100X can be used but requires reprogramming.


Print Page | Close Window