second stater wiring, 07 murano
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=111147
Printed Date: July 13, 2025 at 9:30 AM
Topic: second stater wiring, 07 murano
Posted By: kickercivic1
Subject: second stater wiring, 07 murano
Date Posted: January 30, 2009 at 12:43 PM
I am installing remote start in 2007 Nissan murano. It has (+) second starter wire. How do i wire a relay up? by the way the alarm is Viper 5900.
Replies:
Posted By: BNLUIS
Date Posted: January 30, 2009 at 1:53 PM
at the relay pack of the viper 5900 there is a 4 pin harness, use the small purple wire to trigger a relay purple pin 85
pin 87 and 86 fuse 12v
pin 30 to second starter wire. ------------- Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.
Posted By: t&t tech
Date Posted: January 30, 2009 at 4:51 PM
not to overshadow anyone but you can use a feed of the thick gauge starter wire to trigger the relay, wire it just as stated, but you can connect both feeds at the same point and solder makes the job easier and is less risky than splicing into those thin gauge wires on the ribbon of the relay pack. just a thought
-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF.
PSALMS 37:5
Posted By: joch1314
Date Posted: January 30, 2009 at 5:23 PM
There's actually a seperate 4 pin harness that comes with that second starter output wire, and is different from the ribbon harness. You just need a relay to "power it up enough" if you will. But, yes i can see you using the original starter wire also!
-------------
...half of the truth can be worse than a lie. <----Roger Russell said that..
Posted By: t&t tech
Date Posted: January 31, 2009 at 2:26 PM
joch1314 wrote:
There's actually a seperate 4 pin harness that comes with that second starter output wire, and is different from the ribbon harness. You just need a relay to "power it up enough" if you will. But, yes i can see you using the original starter wire also!
oh my bad, i read it but my mind asumed it to be the ribbon, happens sometimes  ------------- COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF.
PSALMS 37:5
Posted By: kickercivic1
Date Posted: February 03, 2009 at 10:57 AM
So the second starter wire does not need to be cut?? Like first one???
Posted By: loneranger
Date Posted: February 03, 2009 at 10:59 AM
It can be, if you like. Key side would go to #87a.
-------------
Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.
Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?
Moral - Never dismiss the obvious.
Posted By: t&t tech
Date Posted: February 03, 2009 at 3:14 PM
kickercivic1 wrote:
So the second starter wire does not need to be cut?? Like first one???
no it does not need to be, and there is no point in interrupting it, just cut the main starter wire, the second starter wire also referred to as the cold start wire only serves secondary purposes, and doesn't prevent the car from starting normally. ------------- COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF.
PSALMS 37:5
|