Print Page | Close Window

viper 160xvl door lock wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=111155
Printed Date: July 07, 2025 at 11:24 AM


Topic: viper 160xvl door lock wiring

Posted By: adambird
Subject: viper 160xvl door lock wiring
Date Posted: January 30, 2009 at 4:56 PM

Installing a Viper/Derect Electronics 160XVL in a 2002 Jeep Grand Cherokee Limited. I am refered to 'Tech Tip 1041' for wiring information. Has anyone had any experience with this combination of vehicle and Remote Start/Locks system?

Kindest regards to those smarter than I!



-------------
Adam



Replies:

Posted By: Chris Luongo
Date Posted: January 30, 2009 at 6:02 PM
There are various modules available to save the several hours you'd need to wire up that diagram. (It involves running wire inside both front doors, and configuring two relays in each door.)

www.bypasskit.com
www.idatalink.com
www.ifar.ca

If you can find an old-stock DEI 455J, they work great.


Print Page | Close Window