Print Page | Close Window

2006 escalade door locks

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=111176
Printed Date: July 13, 2025 at 6:24 PM


Topic: 2006 escalade door locks

Posted By: Matrix7333
Subject: 2006 escalade door locks
Date Posted: January 31, 2009 at 12:04 PM

Hello all,

I am installing a alarm/remote start system in a 2006 escalade ext.  I have one of the EZbusdata module which include the wires for the door lock.  Do I still have to put a diode on these wires?  If so, which side gets the band?

Thanks




Replies:

Posted By: monty_77
Date Posted: January 31, 2009 at 1:14 PM
please note witch bypass model number it is. some are for passlock only and some are for doorlocks only and some are for both.



Posted By: Matrix7333
Date Posted: January 31, 2009 at 2:33 PM
xk01 with most recent firmware



Posted By: CutDog504
Date Posted: January 31, 2009 at 5:00 PM
You do need diodes for the doorpins(each door trigger) but not the locks.


Print Page | Close Window