remote start f 250/ problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=111235
Printed Date: May 17, 2025 at 1:07 PM

Topic: remote start f 250/ problem

Posted By: kiteman
Subject: remote start f 250/ problem
Date Posted: February 01, 2009 at 10:33 PM

Actually, it's not the remote start that's not working. Here's what I have. I've installed a Viper 5900 remote start, on a 08 F-250 Ford. I used the PKALL by pass mod. Everything works great, except when I remote start the truck, it starts but the horm starts a constant blow. It seems to be the fartory alarm, but i can't find a disarm wire, and dei's info shows NA. Does anyone have any IDEAS???

Replies:

Posted By: davngr
Date Posted: February 02, 2009 at 1:27 AM

once the horn starts going use the key on the door turn it to unlock and see if that makes it stop, if that don't work try inserting the key in the ignition. if either of those work then just find the wire that triggers when you turn the key in the door or the key sense wire in the ignition switch and run the alarms *factory disarm* wire to it. if it's a simple security system this will fix it, if it's one of the complicated ones you might need a CAN module or something. i am not familiar with this car so i can't really advice you any further then this good luck hope this post helps.

-------------
life is a comedy to think, a tragedy to feel

Posted By: kiteman
Date Posted: February 02, 2009 at 6:21 AM

Hey, Thanks for the advice, I will try both those today..