2 accessories!?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=11127
Printed Date: September 10, 2025 at 3:56 AM

Topic: 2 accessories!?

Posted By: blaksaga
Subject: 2 accessories!?
Date Posted: March 19, 2003 at 11:39 AM

I am using a K-9 classic car alarm. It has one accessory input port but I would like to install a dual zone shock/tilt sensor as well as a dual zone proximity sensor. How would I go about hooking both of them up at once? Any help is appreciated.

Replies:

Posted By: the12volt
Date Posted: March 19, 2003 at 1:10 PM

Diode isolate each output connected to your alarm's sensor input. This would be the same as shown below with two door triggers connected to one input of an alarm.

posted_image

-------------
posted_image

the12volt • Support the12volt.com

Posted By: blaksaga
Date Posted: March 19, 2003 at 6:29 PM

Thnx, so what kind of diodes to I need to buy?

Posted By: the12volt
Date Posted: March 19, 2003 at 6:39 PM

1N4001/L - 1amp diodes.

-------------
posted_image

the12volt • Support the12volt.com

Print Page | Close Window