remote starter, 06 envoy?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=111283
Printed Date: May 11, 2025 at 7:23 AM
Topic: remote starter, 06 envoy?
Posted By: 66beetle
Subject: remote starter, 06 envoy?
Date Posted: February 03, 2009 at 1:05 PM
I am putting in a remote starter and want a bypass for the doors and passlock system. I searched the forum and i noticed alot of people using the xk01 but when i tried to order one for a 2006 envoy xl they told me i need the GMBP. My question is there another module that does both for this car. I would also like it to turn on the rear defrost also if possible. Thanks a ton!
Replies:
Posted By: 66beetle
Date Posted: February 03, 2009 at 1:08 PM
I forgot to mention the GMBP was on back order plus i don't think it does defrost?
Posted By: kgerry
Date Posted: February 03, 2009 at 4:13 PM
GMBP is bypass only... XK01 will do locks, bypass, alarm disarm, heated seats & mirrors, etc.... no module out there does defroster that i am aware of......you'll have to harwire it....
------------- Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
Posted By: Chris Luongo
Date Posted: February 03, 2009 at 6:30 PM
GMBP: Passlock bypass only, doesn't do locks.
GMDLBP: Passlock, doorlocks, and has a Panic input.
XK01: Passlock, doorlocks, front window rollup.........and at 32 degrees or below, it'll turn on the rear defroster, as well as heated mirrors and seats if you have them.
Note that the XK01 does NOT have a Panic input. If you want Panic, make sure you have a remote starter with its own horn output.
And, the XK01 needs to have the right firmware in it, as it can be loaded with firmware to do all kinds of different cars. Make sure you buy from a seller who will ship it to you configured correctly.
Posted By: 66beetle
Date Posted: February 04, 2009 at 2:38 AM
thanks for all the help! I was really confused with all the different models and brands. I purchased an XK01-AMDL. This website is awesome i've found more answers here than the installer in my area!
Posted By: 66beetle
Date Posted: February 24, 2009 at 3:38 PM
I just finished installing a prestige XR6900 and the 2-way remote confirms signals for about 1 min than stops confirming. All the comands work fine from the remote. I notice if i unplug the antenna and plug it back in it works for about 1 min than stops again. Any ideas? Or how would i go about replacing the antenna with customer support. I purchased it online from an elec store. Thanks for all the help.
|