dei python 571xp, ’08 jeep compass

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=111313
Printed Date: May 14, 2025 at 8:12 PM

Topic: dei python 571xp, ’08 jeep compass

Posted By: rdlsz24
Subject: dei python 571xp, ’08 jeep compass
Date Posted: February 04, 2009 at 12:47 PM

I have a DEI Python 571XP installed on my wife's '08 Jeep Compass. All is well except when the doors auto lock (doesn't matter if started with remote or with key), the horn honks. It didn't do this before the install, and it's not set to do it in the car's computer as far as I can tell. I had it installed at American (Midwest retail store), and the guy that installed doesn't really have any ideas left on how to make it stop doing this. I have the manual, etc, and cosider myself competant with electronic settings, etc, so if anybody has an idea on how to turn this annoying feature off I am willing to try it.

P.S. My brother said his gf's new Chrysler Sebring does the same thing with a starter installed at the dealer.

Rob

Replies:

Posted By: BNLUIS
Date Posted: February 04, 2009 at 1:03 PM

program ignition controlled door locks off, I am assumming he use a module to bypass and integrate door locks. so when the door lock signal is send it honks the horn.

-------------
Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.

Posted By: rdlsz24
Date Posted: February 04, 2009 at 9:24 PM

Are you saying I should make it so the doors don't auto lock?

Rob

Posted By: BNLUIS
Date Posted: February 05, 2009 at 2:23 PM

yes but on the python unit , not the car.

-------------
Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.

Posted By: rdlsz24
Date Posted: February 05, 2009 at 2:32 PM

Ok I can try that. It should tell in the manual how to do that correct?

Rob

Posted By: BNLUIS
Date Posted: February 05, 2009 at 2:33 PM

yes, but on the install manual

-------------
Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.