98 crv alarm system
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=111367
Printed Date: May 13, 2025 at 10:02 PM
Topic: 98 crv alarm system
Posted By: bboyflashy
Subject: 98 crv alarm system
Date Posted: February 06, 2009 at 8:52 PM
i put a remote starter in and everythings fine except sometimes when i lock the door and start the car the alarm goes off and i can't use the new remote to end the alarm, and have to use the factory one to stop it, how do you knock the siren out?
Replies:
Posted By: t&t tech
Date Posted: February 07, 2009 at 2:22 PM
what kind of equipment are you using?,if you have to disarm using the factory fob, then you'll need to connect the factory diarm wire. ------------- COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF.
PSALMS 37:5
Posted By: loneranger
Date Posted: February 07, 2009 at 2:25 PM
| Factory Disarm | Yellow | Driver's Kick Panel this is Ignition. for Alarm use Relay |
------------- Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.
Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?
Moral - Never dismiss the obvious.
Posted By: bboyflashy
Date Posted: February 07, 2009 at 3:45 PM
i'll try tomorrow and let y'all if it work
Posted By: bboyflashy
Date Posted: February 08, 2009 at 4:24 PM
some how i connected the wire already and it still doesn't work, do i have to use a relay for the alarm? and what kind
Posted By: howie ll
Date Posted: February 08, 2009 at 5:32 PM
Look at loneranger's post, you'll have to switch your neg going wire to pos via a relay.
Posted By: bboyflashy
Date Posted: February 08, 2009 at 5:49 PM
i sorry but i really don't get it. can you explain it thoroughly
Posted By: loneranger
Date Posted: February 09, 2009 at 9:24 PM
- What model R/S?
- You may have already fried the output.
------------- Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.
Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?
Moral - Never dismiss the obvious.
Posted By: bboyflashy
Date Posted: February 09, 2009 at 10:31 PM
the alarm is still working. is it easier to just take the alarm out
Posted By: bboyflashy
Date Posted: February 11, 2009 at 8:59 PM
how do i take out the factory alarm? and use the remote starter alarm
Posted By: bboyflashy
Date Posted: February 13, 2009 at 12:43 PM
what type of relay should i use for alarm?
Posted By: loneranger
Date Posted: February 13, 2009 at 10:09 PM
Answer my previous simple question, then some one can begin to help you specifically. This is another reason not to start multiple threads, about the same vehicle. ------------- Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.
Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?
Moral - Never dismiss the obvious.
Posted By: flobee4
Date Posted: February 13, 2009 at 11:08 PM
Unfortunately there is no way to disarm your Honda factory alarm except with the original Honda key chain. The wire that loneranger reference is the ignition wire going to the factory alarm and is located at the factory alarm module. This wire will only TEMPORARILY disable the ability for the factory alarm to realize that the car is trying to start. You need to wire a relay to "open" up this wire(cut the ignition feed to the factory alarm module). Also, when the factory alarm is set, the car probably won't start either. There is a second wire that usually needs to be "opened' also that controls the factory ignition kill relay. I usually locate this relay and just connect my starter wire from my remote starter after the factory ignition kill relay instead of at the steering column. Now.... after you do all this if you use your G11 remote to open the doors the factory alarm would still go off. You would need to continue using the factory remote to open the doors to disarm the car. With all that said, you have a few options: 1) remove the factory alarm fuse and/or unplug the factory alarm.(try fuse first), just use your G11 remote starter for starting and keyless. This will leave you without an alarm. 2)You can wire it as above, just don't use your G11 to unlock-use factory remotes only. 3)Change your Remote starter to a 1-button starter. A 1-button starter will not have lock/unlock and the controller is MUCH smaller. When you install the 1-button starter wire as above and use your factory keyless to get in the car. thus disarming the car everytime. 4)Change your remote Starter for a Alarm/Remote Starter combo. Remove the factory alarm fuse and/or unplug factory alarm(try fuse first). You will now have and aftermarket alarm with remote starter. Good luck in your decisions.... Here is the Honda install manual for the factory alarm: https://www.handa-accessories.com/crv/crvsecmain.pdf
Posted By: the12volt
Date Posted: February 13, 2009 at 11:13 PM
Duplicate topic closed. Please continue posting in this topic: https://www.the12volt.com/installbay/forum_posts.asp?tid=111377-------------  the12volt • Support the12volt.com
|