d2d to idatalink cable
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=111370
Printed Date: May 19, 2024 at 9:06 AM
Topic: d2d to idatalink cable
Posted By: levin91e
Subject: d2d to idatalink cable
Date Posted: February 07, 2009 at 9:36 AM
Does anyone know the pinout for the d2d cable and the idatalink cable. idatalinks bypasses now are able to output in d2d format but there is no cable available yet. It may be a simple straight through connection pin1 to pin1, pin2 to pin2, etc. But I have a feeling it is probably not that simple. If anyone knows a source of the actual cable let me know also. I do know that it is a RS232 interface so there should be a transmit data pin, a receive data pin, a signal ground, and possibly a carrier detect. I'm pretty sure the TD and RD need to be crossed.
Thanks in advance.
Replies:
Posted By: Chris Luongo
Date Posted: February 07, 2009 at 3:04 PM
I would sign up for their forum at www.12voltdata.com. Their tech support manager Stephane is on there all the time, and he's very helpful and informative.
Posted By: levin91e
Date Posted: February 07, 2009 at 6:54 PM
Ok thanks, I didn't realize they had a forum.
|