avital 4113, camry 2005

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=111420
Printed Date: April 19, 2024 at 5:55 AM

Topic: avital 4113, camry 2005

Posted By: mmkl
Subject: avital 4113, camry 2005
Date Posted: February 08, 2009 at 8:55 PM

I have hit a block wall on this car.
Any information on this matter would be a great help. Camry 2005 no factory alarm, only trunk release, and unlock, lock buttons.

Here is what I have wired so far.

Avital R/S Wire           -      Camry wire

red 12v high current input       WHITE/ red(+)
pink ingnition output            BLACK/ red(+)purple starter output            BLACK/ white(+)orange accessory 1 output        blue red(+)
red 12v high current input       WHITE/ red(+)

light GREEN/ black factor alarm disarm    x
GREEN / WHITE factor alarm x
yellow(+) ignition out (to alarm)        x
WHITE/ blue(-) activation input           x
brown(-) horn output GREEN/ black
orange(-) ground when locked output      x
RED / white trunkrelease(-)200ma output WHITE/ blue
black(-) chassis ground              chassis
white (+/-) light flash output          red

The x are the ones I need help on.
I have tried starting the car with the remote and the car does not even turn over.
All I can here is the box click and nothing else is working.
The lights do not work or the doors do not work either.
I bought a bypass, and tried to install it.
Went looking for the wire and it is not there.
I have a relay hook up to the second starter
87 constant power
86 ground
86 starter R/S
30 start 2 car

Replies:

Posted By: howie ll
Date Posted: February 09, 2009 at 3:08 AM

There should be a post on this vehicle on this site in vehicle wiring section

Posted By: Mike M2
Date Posted: February 09, 2009 at 6:26 AM

You don't need lightGREEN/ black disarm, tho if it has a factory alarm you will need to connect the keysense.

You don't need yellow ign. output.

You don't need WHITE/ blue activation.

You don't need brown horn unless you wish to connect it.

Orange is for a starter kill relay. Do you have one?

You have 86 listed twice on your relay. How is it really connected?

Place the key in the ignition and don't turn it on. Try the RS, does it work? If so your bypass isn't correct.

-------------
Mike M2
Tech Manager
CS Dealer Services

Posted By: mmkl
Date Posted: February 09, 2009 at 3:12 PM

Sorry I miss type
87 constant power
85 ground
86 Starter wire on the R/S
30 Starter 2

If the relay is wrong please let me know
Also do I have to connect the R/S BLACK/ white (-) neutral safety switch input.

Posted By: Mike M2
Date Posted: February 09, 2009 at 5:01 PM

There's your issue, the NSS wire must be grounded.

-------------
Mike M2
Tech Manager
CS Dealer Services

Posted By: mmkl
Date Posted: February 09, 2009 at 9:47 PM

thanx for the information
I will try that this weekend
I will let you know how it went
Thanx