2009 pontiac vibe, remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=111506
Printed Date: July 05, 2025 at 8:09 AM

Topic: 2009 pontiac vibe, remote start

Posted By: dubohio
Subject: 2009 pontiac vibe, remote start
Date Posted: February 11, 2009 at 3:04 PM

I have everything hooked up but :

Second Starter - White (2.4L models only) +

Second Ignition - Green +

Accessory - Gray +

All are supposed to be located in the ignition harnness/switch. Could somone please give me some insight as to where these wires are? I cant get the cover off the colum, it's tight and I dont want to break it. Where are these 3 wires I need and what guage wire should I be looking for?

~Garry

-------------
Trubo lag is just my way of giving you ahead start

Replies:

Posted By: howie ll
Date Posted: February 11, 2009 at 5:25 PM

You've got to get that cover off, there's probably a transponder anyway so you'll have to get to the switch.

Posted By: ckeeler
Date Posted: February 11, 2009 at 7:28 PM

they should be there in the same harness as the other ones. and yes some models of the Vibe do have a transponder so you need to check yours because if it does have one you will need to bypass it. so....do you have the 2.4? if so the second starter wire is a thin black one. the second ignition is a thick brown one. and accessory is a thin grey one. but really you should be testing these wires anyway as you go.

Posted By: dubohio
Date Posted: February 11, 2009 at 11:06 PM

I found all the wires once I removed that cover. The car is a Vibe GT with the 2.4 in it but those colors you mentioned are wrong.

-------------
Trubo lag is just my way of giving you ahead start

Print Page | Close Window