2004 explorer eddie bower, python 1400xp
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=111512
Printed Date: May 14, 2025 at 1:02 AM
Topic: 2004 explorer eddie bower, python 1400xp
Posted By: audia6driver28
Subject: 2004 explorer eddie bower, python 1400xp
Date Posted: February 11, 2009 at 6:55 PM
Hey all,
I have just installed a Python 1400XP with the wiring diagrams found on this site. The unit seems to be working other than the remote start portion.
The lock/unlock with horn and light flash works great.
When I try to remote start (already tach learned) using the 2 button push, there is no response whatsoever.
Any ideas?
Replies:
Posted By: joch1314
Date Posted: February 11, 2009 at 7:19 PM
Are you using a bypass module? If so, which one, and did you hook up brake and neutral safety shutdown wires? What about hoodpin....although that one shouldn't really give you a problem with remote starting unless it's installed and seeing ground. Verify your remote start wires with a DMM and make sure they're doing what they're supposed to be doing.
-------------
...half of the truth can be worse than a lie. <----Roger Russell said that..
Posted By: fordguy06
Date Posted: February 11, 2009 at 9:22 PM
is the BLACK/ white wire in the 5 pin harness grounded? make sure hood pin is not grounded.
|