2001 denali, dei valet doorlock

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=111709
Printed Date: May 16, 2024 at 4:26 AM

Topic: 2001 denali, dei valet doorlock

Posted By: dondi
Subject: 2001 denali, dei valet doorlock
Date Posted: February 17, 2009 at 10:55 PM

I have installed a DEI Valet remote start system along with a passlock bypass and have all of the functions working except for the door lock/unluck and the arm/disarm

The Valet has two outputs at -200 ma for the door locks. Will I need to add two relays to control the door locks or can energize the factory relay somehow with the Valet output?

Also, I do not know where to hookup the arm/disarm wires. This is a wiring diagram for my vehicle for the doorlocks.

Thanks in advance.

Dondi

Replies:

Posted By: Mike M2
Date Posted: February 18, 2009 at 6:28 AM

The wires you need are in the bottom of the fuse panel, white for unlock and light blue for lock. No relays needed, just connect your Valet green and blue to them. They are positive pulse, so green goes to white and blue goes to light blue. Ther are no arm/disarm wires needed...

-------------
Mike M2
Tech Manager
CS Dealer Services

Print Page | Close Window