Print Page | Close Window

Viper 550 - 2002 Honda Accord

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=11173
Printed Date: May 18, 2024 at 10:48 PM


Topic: Viper 550 - 2002 Honda Accord

Posted By: 2k2AccordEX
Subject: Viper 550 - 2002 Honda Accord
Date Posted: March 20, 2003 at 9:26 AM

I have a 2002 Honda Accord with a factory security system. I have installed the Viper 550 into the car, but now having problems. Lock = "ARM" Unlock = "DISARM" on the factory security.  I connected the Viper door lock & unlock wires to those wires in the drivers door and to the power door lock & unlock wire on the pass. side fuse block. (All "NEGATIVE" triggered).   Viper has these wires : GREEN/ black  wire - factory security disarm  -- 1 sec before remote start activates.    Blue wire -- factory security rearm.  Both wires are "NEGATIVE" outputs, only work for remote start portion of the unit.  How would I connect these wires so I don't have the car locking and unlocking when remote starting.???

Any help at all is appreciated, thanks guys.



-------------
If I have an idea, and you have an idea and we share ideas, then we each have two Ideas, together we have four.



Replies:

Posted By: Velocity Motors
Date Posted: March 20, 2003 at 6:20 PM

Attach the GREEN/ black  wire - factory security disarm  -- 1 sec before remote start activates to the BLUE wire found at the driver's door lock switch. Look here at these posts for more information:



-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA


Print Page | Close Window