2009 kia borrego

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=111756
Printed Date: April 29, 2024 at 6:04 PM

Topic: 2009 kia borrego

Posted By: brianh
Subject: 2009 kia borrego
Date Posted: February 19, 2009 at 5:07 PM

I have purchased a remote start and a bypass for this vehicle. The problem is it is a xpresskit dlpk. The info that came with the bypass does not show the Borrego on the list. I do think this is the right kit. Also will i need the optinal rf loop that is used with this kit To get around the transponder? Any info would be greatly appreciated. Thanks in advance. Brian

Replies:

Posted By: chadwa2003
Date Posted: February 19, 2009 at 6:09 PM

You will need eithier a 556uw or a pats-kia1 and a dealer scan tool to bypass the factory immobilizer.

Posted By: chadwa2003
Date Posted: February 19, 2009 at 6:13 PM

sorry after looking at the install manual it says you will need a rflkia2 but you will still need a dealer scan tool to program this loop

Posted By: brianh
Date Posted: February 19, 2009 at 8:33 PM

So are you saying that i have the right bypass unit and need to add the rf loop? I read that the dealer might have to program the rf loop. Brian

Posted By: chadwa2003
Date Posted: February 19, 2009 at 8:42 PM

the dealer will need to program the loop

Print Page | Close Window