best kill switch for 95 chevrolet lumina

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=111757
Printed Date: July 03, 2025 at 9:00 AM

Topic: best kill switch for 95 chevrolet lumina

Posted By: darkpikasso
Subject: best kill switch for 95 chevrolet lumina
Date Posted: February 19, 2009 at 5:20 PM

Hi everybody...

First, thank you for letting get into the forum is very cool everything and very insteresting.
Second, sorry if i post it wrong the message, feel free to move it.

Now the doubt, I have a Chevrolet Lumina 1995, and i want to install a killswitch, but i dont know wich one to install, or what is the best to install, either a inmobolizer or simple killswitch from the ignition switch...

I dont know how to do it, and i've look in every forum and nothing.

Can anyone help me?

Thank's to all...

Greetings From Mexico.

Replies:

Posted By: ckeeler
Date Posted: February 20, 2009 at 12:32 AM

Hola, the best killswitch/antitheft for you to do would be to just add a starter kill. your lumina already has a fuel fump anti-theft built in with the GM vats system. it it possible to add an additional immobilizer as well but it would be overkill in your situation. Are you in the north, or central? the most common thing will be to just tow the car away. you could make it a little safer with an added starter kill...but no matter what...it could still be towed off.

Posted By: darkpikasso
Date Posted: February 20, 2009 at 11:03 AM

i'm in the north of the republic of Mexico, nearby the border with El Paso...

And yes i would like to add a starter kill, but how can I do it, any diagram or conection drawing or something to install it myself?

Thanks.

Posted By: ckeeler
Date Posted: February 20, 2009 at 2:25 PM

ahh yes, good old Juares. your not far from me at all. the most common thing for thieves to do around where you live is to just tow a car away. none the less some type of security is better than none. if you look at the top of the page at "relays" there are several types of starter kill setups you could make, diagrams and everything are there.

Posted By: darkpikasso
Date Posted: February 20, 2009 at 3:57 PM

thanks Ckeeler...

I'm looking at the diagrams of the relays, there several, now i dont have a problem to get the components and make the circuit myself, but how can i connect it to the car, i mean, where do i make the cuts of the wire o how...

Thanks again..

Posted By: loneranger
Date Posted: February 20, 2009 at 4:08 PM

Here is an idea. Install the kill switch to the ignition or starter, as well as the horn. When the ignition or starter goes active and the kill-switch is active, the relay will lock the horn on, until the kill-switch is de-activated. That should give them a jolt. Install a pair of air-horns in the vehicle cabin, for maximum effect.

Ignition 1

PINK

(+)

IGNITION SWITCH HARNESS

Starter 1

YELLOW

(+)

IGNITION SWITCH HARNESS

Horn

BLACK

(-)

AT STEERING COLUMN

-------------
Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.
Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?
Moral - Never dismiss the obvious.

Posted By: darkpikasso
Date Posted: February 23, 2009 at 10:20 AM

Thanks loneranger...

I can open the board under the sterring column, because i have to remove the air bag and its a lot of problem, if i locate the wire's, and could conect everything, now i'm watching the diagram's for the killswitch, but the one with switch requeries two relay's, i have allready one, now there's a diagram to the killswitch for a touch killswitch, the one that touch one bolt and make negative with other metalic place..

Thanks again..