Print Page | Close Window

2005 dodge dakota abs light remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=111832
Printed Date: July 02, 2025 at 5:39 AM


Topic: 2005 dodge dakota abs light remote start

Posted By: tnaant
Subject: 2005 dodge dakota abs light remote start
Date Posted: February 22, 2009 at 7:29 AM

Hey, I just installed a CS-2011RS series IV, and the truck starts using the remote, but the ABS light comes on. It goes out once the black key is put in and turned on.  I made a connection to the 1st and 2nd ignition and to the dark blue accessory. But I ran out of wires to connect the rest. Should I add a relay to turn on the rest of the accessories? Do you think the ABS rides on the other accessories?    Also, when the key is in and I hit the brake, the brake light comes on like it it supposed to, but when I let off, I hear a realy clicking. I used the WHITE/ lt. blue wie to the brake switch. Thanks!



Replies:

Posted By: robertsc
Date Posted: February 22, 2009 at 9:33 AM
yes it is a missed wire




Posted By: tnaant
Date Posted: February 22, 2009 at 11:42 AM
Is it nessicary?




Posted By: loneranger
Date Posted: February 22, 2009 at 1:40 PM

tnaant wrote:

Is it nessicary?

Do you think the vehicle was designed to show an ABS warning light, when the ABS should be operating properly?



-------------
Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.
Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?
Moral - Never dismiss the obvious.




Posted By: tnaant
Date Posted: February 22, 2009 at 3:02 PM
No, but when no one is in the vehicle, and the key isnt in the ignition, I don't see why it would be a problem...thats why I was asking.





Print Page | Close Window