noob, viper 5701, 1995 acura integra
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=111879
Printed Date: July 18, 2025 at 4:03 PM
Topic: noob, viper 5701, 1995 acura integra
Posted By: bartman201
Subject: noob, viper 5701, 1995 acura integra
Date Posted: February 23, 2009 at 9:11 PM
I'm new at this. i just installed a viper 5701 on my 1995 Acura Integra. everything works fine. the only problem that i have is that damn alarm will not arm it self, i tried the system feature change but it wont take.
how can i change the options on the alarm, can someone give instructions on how to do it step by step. thanks.
Replies:
Posted By: bartman201
Date Posted: February 23, 2009 at 9:56 PM
this is what i tried :
1. Open a door. (The GREEN wire, H1/8, or the VIOLET,
H1/6 must be connected.)
2. Ignition. Turn the ignition on, then off. (The heavy
gauge PINK wire must be connected.)
3. Select a Menu. Press and HOLD the Valet/Program
switch. (The Valet/Program switch must be plugged into the blue port.) After
three seconds the siren will chirp once indicating entry to the Basic Features
Menu. If this is the menu you want, release the button and go on to Step Step 4.
4. Select a Feature. Press and release the Valet/Program
switch the number of times corresponding to the feature
you wish to change.
5. Program the Feature. While holding the Valet/Program
switch, you can toggle the feature on and off using the
remote control. Pressing the button that arms the system will select the one chirp or default setting. Pressing the button that disarms the system will select the two chirp setting.
this is where i get lost i need to go to 3 chirp how the hell do i do that?
Posted By: SoundImage
Date Posted: February 23, 2009 at 9:57 PM
doucle check your dooe trigger connection, the alarm wil not auto arm until 30 sec. after the door signal is lost. i believe feature 1-1 is passive arm
Posted By: bartman201
Date Posted: February 23, 2009 at 11:03 PM
door trig works. im looking for the option that arms it self and lock the car is that 1-1 or 1-3 and if it is 1-3 how do i get to it?
this is what the Install Guide said:
1-1 ACTIVE/PASSIVE ARMING: When active arming is selected, the system will only arm when the transmitter is used. When set to passive the system will arm automatically 30 seconds after the last door is closed. To alert the consumer of passive arming, the siren will chirp 20 seconds after the door is closed. This provides the consumer with an audible warning prior to the system actually arming. At the 30 second mark the system will arm but the siren will not chirp.
Posted By: t&t tech
Date Posted: February 24, 2009 at 7:27 AM
you may be in the wrong menu, why would you need to go to three chirps, when there are only two options, passive and active arming,
-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF.
PSALMS 37:5
Posted By: bartman201
Date Posted: February 24, 2009 at 9:57 AM
according to the install guide there's 5 i need option 3 passive arm with lock
Posted By: t&t tech
Date Posted: February 24, 2009 at 2:35 PM
my bad. sorry
-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF.
PSALMS 37:5
Posted By: bartman201
Date Posted: February 24, 2009 at 8:12 PM
so how do i get option 3?
|