aftermarket alarm with factory fob

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=111883
Printed Date: May 10, 2025 at 12:30 PM

Topic: aftermarket alarm with factory fob

Posted By: INSTALLTECH323
Subject: aftermarket alarm with factory fob
Date Posted: February 23, 2009 at 10:25 PM

hello to everyone

is their any alarm out their that you could program to work with a factory key fob with and without remote start??

-------------
MECP CERTIFIED TECH

Replies:

Posted By: dr.jon007
Date Posted: February 23, 2009 at 10:34 PM

The last one I used was the Hornet (727t I think) It uses the lock system in the vehicle (activated by the factory keyless) to arm and disarm the aftermarket alarm.

Posted By: INSTALLTECH323
Date Posted: February 23, 2009 at 10:39 PM

thanks for the info i will look in o it

-------------
MECP CERTIFIED TECH

Posted By: mikvot
Date Posted: February 24, 2009 at 11:31 PM

Code Alarm also makes the ca310, which will do what you want.

-------------

Posted By: Chris Luongo
Date Posted: February 25, 2009 at 11:10 AM

There's also the Audiovox PRO-9233, which is probably the same as that Code Alarm CA310.

If you find a PRO9232A or a PRO9232, those are just older versions of the 9233.

Print Page | Close Window