audiovox ascl100?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=111911
Printed Date: September 11, 2025 at 2:47 PM
Topic: audiovox ascl100?
Posted By: 66beetle
Subject: audiovox ascl100?
Date Posted: February 25, 2009 at 2:33 AM
I have the ascl100 going on a Aps687a. I looked over the paperwork i need to fill out and fax them for activation and i'm wondering if i'm missing something. The paperwork has the number to call to lock, unlock, carfinder, etc. but no remote start. There is a box i can check on the form and write in an option, whats that for? Do i need to wire it to the remote start with something besides the 4 pin cable that comes with it. I just want to make sure i fill everything out correctly. Thanks for all the help
Replies:
Posted By: SoundImage
Date Posted: February 25, 2009 at 9:47 AM
not to sure the best thing to do is to call audiovox direct
Posted By: Chris Luongo
Date Posted: February 25, 2009 at 11:07 AM
I have one, but I only used it maybe a half dozen times.
If I remember right, you just make the command for "auxilary function" or whatever it says there, that'll start the car.
Posted By: 66beetle
Date Posted: February 26, 2009 at 1:18 AM
do you have to wire it up? because the manual for the remote starter says to hook up the the -neg triger of the remote start to the car link or other pager system. But the car link only came with the box, telematics cable and forms to fill out. no other instuctions came with it but the carlink has a spot for another 2 wire plug but did not come with wires to plug into it. do you just set up the account and call the number and have it activate the (other option) and it will remote start?
Posted By: installmarc
Date Posted: February 26, 2009 at 1:16 PM
the option you need to use for remote start is number 7.
Posted By: installmarc
Date Posted: February 26, 2009 at 1:18 PM
sorry. it is just plug and go.
Posted By: Chris Luongo
Date Posted: February 26, 2009 at 4:03 PM
Definitely just plug and go.
They do (or at least did) offer a second part to add to the CL100, for people who have a non-Audiovox remote starter, or even just factory power locks........ it would give you regular negative outputs that you could hook up right to the car.
But in your case you don't have (or need) that extra part, so just plug it into the alarm brain.
You might notice in the instructions, that before you fax that paper in, there's a way for the installer to operate the unit a couple of times without making a password, just to make sure it's working.
Posted By: installmarc
Date Posted: February 26, 2009 at 8:21 PM
In order for the installer to test the unit they must have set up a dealer account with the company. When you call to test it they ask for a four digit dealer id and a four digit password.
Posted By: 66beetle
Date Posted: March 01, 2009 at 12:50 PM
how long does it take for the unit to be activated? I set up a dealer id and pin. I called the number and went through the menu to test the functions and says the signal is being sent but nothing happens. I filled out the customer subscription form and i'm faxing it to them on monday to see if that makes a difference.
Posted By: Twelvoltz
Date Posted: March 01, 2009 at 5:50 PM
I did a couple of these and did not have to fill out the dealer form. I just faxed over the activation form and by the next day everything worked fine. I still have one left brand new in the box with nothing to hook it to. I am actually tossing around the idea of changing from my current system to a system that can use it.
-------------
Installer, IT support, and FFL. I need less hobbies.
|