remote start python 460hp

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=111963
Printed Date: May 15, 2024 at 8:37 PM

Topic: remote start python 460hp

Posted By: mcook31
Subject: remote start python 460hp
Date Posted: February 26, 2009 at 10:25 PM

I have a 2000 pontiac grand am with a Python 460HP alarm installed. I picked up an autostart AS-2775.

Can this unit be added to work with my existing alarm. Will the 5 button remotes work with the Python 460HP.

Thanks

Replies:

Posted By: calijtee1
Date Posted: March 11, 2009 at 11:55 PM

yeah just use the aux wire. are you using the red white to open up your trunk??? if not you can use the white blue. chan 3 its programmable ... even with the reg three button remotes theres a sequence you gotta program.. but you can i have done it before.

-------------
installers do it best. we got the magic hands!

Posted By: calijtee1
Date Posted: March 11, 2009 at 11:57 PM

the 474 p and the i think the 471c will work

-------------
installers do it best. we got the magic hands!

Posted By: soundnsecurity
Date Posted: March 13, 2009 at 3:29 PM

calijtee1 wrote:

yeah just use the aux wire. are you using the red white to open up your trunk??? if not you can use the white blue. chan 3 its programmable ... even with the reg three button remotes theres a sequence you gotta program.. but you can i have done it before.

if you do this you will need to disarm your 460 before you remotestart so it wont trigger the starter kill relay.

-------------

Posted By: bmfsiii
Date Posted: March 13, 2009 at 11:07 PM

You wont need to disarm the 460 first before remote starting the auto. Use the ground out when running wire with a relay from the auto start to interuppt the ignition wire on the 460.

Print Page | Close Window