05 dodge magnum/1400xp
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=112003
Printed Date: July 18, 2025 at 2:37 AM
Topic: 05 dodge magnum/1400xp
Posted By: salisbmj
Subject: 05 dodge magnum/1400xp
Date Posted: February 28, 2009 at 5:59 PM
I recently purchased a python 1400xp for my 2005 dodge magnum. After wiring the system I engaged the remote start and the system started the car 3 times unsucessfully. I then came back to the forums and found that i needed to cut and hook up the 2nd start wire/accessory wire to a set of relays, using the 1084 diagram. I dont understand the diagram when one lead is hookes up to the prpl ignition wire on the alarm module. The orange wire is easy enough and when i hook it up i get the accessories in the car working. But what wire do i use on the alarm module. Any help would great.
Replies:
Posted By: chadwa2003
Date Posted: February 28, 2009 at 9:16 PM
go to www.bypasskit.com enter your vehicle you should come up with a pkucg2x that will do your PURPLE / brown wire which controls your negative start and accessory. What did you use to bypass the chrysler immobilizer?
Posted By: salisbmj
Date Posted: March 01, 2009 at 11:19 AM
So if I use a BYPASSKIT i wont need to work with the second accessory/start wire at all?
Posted By: chadwa2003
Date Posted: March 01, 2009 at 2:39 PM
there is one wire coming off the bypass to control PURPLE / brown mux wire. You just won't have to use relays for the negative start and accessory
|