do i need a bypass module
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=112070
Printed Date: May 20, 2024 at 10:48 AM
Topic: do i need a bypass module
Posted By: bigbeast
Subject: do i need a bypass module
Date Posted: March 03, 2009 at 6:14 AM
i have a 01 blazer, and am having a little confusion as to if i need one or not, and which one, can anyone provide me a link to the correct one or whatever, greatly appreciated
-------------
Brain
Replies:
Posted By: robertsc
Date Posted: March 03, 2009 at 7:32 AM
www.bypasskits.com
Posted By: Chris Luongo
Date Posted: March 03, 2009 at 10:08 AM
Your Blazer has GM's Passlock II anti-theft system, and you definitely need to interface with it in some way to get a remote starter to work.
You might notice when you turn the ignition on, among all the other warning lights, there's one that says SECURITY. That's your Passlock light right there.
Anyway, an Audiovox AS-GM4 or a DEI 555L is a reliable, tried-and-true way of interfacing with it.
If you use the search feature on this forum, you'll see that you can make your own bypass with resistors and relays, if you're comfortable doing that sort of thing.
Also try www.ifar.ca and www.idatalink.com.
Posted By: bigbeast
Date Posted: March 28, 2009 at 8:29 PM
sounds good, I am good with electronics, actually, I am a laptop technician, so when i have a few extra minutes i will search around for those instructions, I have plenty of time, as i still have to RMA the alarm due to inoperable flashing lights function, thanks for the advise, I love this site.
-------------
Brain
|