clifford arrow 3 wont disarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=112090
Printed Date: May 25, 2025 at 9:36 PM

Topic: clifford arrow 3 wont disarm

Posted By: xwikedonex
Subject: clifford arrow 3 wont disarm
Date Posted: March 03, 2009 at 8:16 PM

Vehicle: 1998 Toyota Tacoma

Alarm: Clifford Arrow 3

I was trying to program the trunk release/Acessory output in the installer programmable features and now my alarm wont disarm from the remote. However, It will arm and go into valet mode from the remote. I double checked the programming and corrected the lock pulse that got changed and it worked fo a while. Then it stopped disarming again and when i checked the programming, stuff had switched back. I corrected it again and it still didn't work . I reset it to factory settings through the user selectable features and it still wont disarm when i hit the button on my remote. Anybody got clue what is going on with my alarm?????

Replies:

Posted By: xwikedonex
Date Posted: March 03, 2009 at 9:10 PM

An interesting development . . . . i just cleared all the remotes from my alarms memory and then re-programmed them. Now my alarm will arm and disarm from the remote but not with the correct buttons. The arm/Disarm button now actives Valet mode. The Star now arms the alarm, and the Trunk button disarms it posted_image

posted_image

Posted By: loneranger
Date Posted: March 04, 2009 at 2:16 AM

You may have re-programmed them in-correctly.

-------------
Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.
Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?
Moral - Never dismiss the obvious.