after market trunk popper

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=112097
Printed Date: May 25, 2025 at 3:37 AM

Topic: after market trunk popper

Posted By: shakermaker
Subject: after market trunk popper
Date Posted: March 04, 2009 at 4:20 AM

posted_image

This is my autopage rf-220 alarm i have installed. I have just brought a trunk popper, would connecting it to the grey wire work so i can use the trunk button on my remote?

Replies:

Posted By: shakermaker
Date Posted: March 04, 2009 at 8:53 AM

Just looked at the relay page as well, would i need to make a relay to convert the - output to a + output for it to work?

Posted By: howie ll
Date Posted: March 04, 2009 at 12:24 PM

First thought, isn't there a dedicated trunk release output, probably RED / white? Secondly if your trunk release is low current neg, then no relay needed. If pos, (you must test) you will need a relay. Release wire to 85, 15amp fused to 87 and 86, output from 30. This should all be in the owners guide or install manual.

Print Page | Close Window