Print Page | Close Window

if i pull the main fuses on my alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=112154
Printed Date: May 19, 2025 at 3:54 PM


Topic: if i pull the main fuses on my alarm

Posted By: black cavy
Subject: if i pull the main fuses on my alarm
Date Posted: March 06, 2009 at 10:05 AM

Alarm-Autopage RS-855LCD

Hi

If I pull the 2 main Fuses on my Alarm will all my settings be reset. Also how will this effect my DEI 555W Pass lock 2 Module

I have a Big Current Draw somewhere in my car and want to Pull the Two Main Fuses for the Alarm and let the car sit for 3 days and see if the Battery Goes dead still like before, since I just bought a Optima Red Top and think my other battery was the problem

But I don't know if I pull those Fuses, that I will have to Re-program my Alarm and Pass lock 2 Module

I think its the Alarm Brain or a Stuck Starter solenoid that keeps draining the car to about 6V every night

As I don't have anything else in the Car but the Alarm, My Radio is Unplugged and my Fuse for my interior Lights so my Door Pins can't work either

Thanks for your time:)




Replies:

Posted By: robertsc
Date Posted: March 06, 2009 at 3:04 PM

Should not reset anything.

Most pieces retain there memory nowadays.




Posted By: black cavy
Date Posted: March 06, 2009 at 9:29 PM
robertsc wrote:

Should not reset anything.

Most pieces retain there memory nowadays.

Thats Good to know

I wasn't sure,The Alarm was made in 2005


Print Page | Close Window