marksman m6a remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=112215
Printed Date: April 20, 2024 at 12:03 AM
Topic: marksman m6a remote start
Posted By: mjkurth72
Subject: marksman m6a remote start
Date Posted: March 08, 2009 at 8:01 PM
installed a marksman m6a remote start on a 1998 Chevy Silverado, everything worked and then the led on the module stays lit, will not let me program it or anything. Door locks and unlocks, but remote start will not engage. checked all wires and connections. Is there a way to reset module or what does the led mean when it is o all the time (did not stay on at all times before) please help thanks
Replies:
Posted By: loneranger
Date Posted: March 08, 2009 at 8:44 PM
More than likely, it's in valet mode.
-------------
Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.
Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?
Moral - Never dismiss the obvious.
Posted By: mjkurth72
Date Posted: March 08, 2009 at 8:47 PM
how do you get it out of valet mode, dont know that much that is why I ask
Posted By: loneranger
Date Posted: March 08, 2009 at 8:51 PM
The owner's manual should provide you with that information.
-------------
Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.
Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?
Moral - Never dismiss the obvious.
Posted By: mjkurth72
Date Posted: March 08, 2009 at 10:25 PM
does not say in manual
Posted By: securinu
Date Posted: March 08, 2009 at 10:53 PM
did you ground the BLACK/ white wire???
-------------
Joe O'Byrne
Owner / Installer
Posted By: mjkurth72
Date Posted: March 08, 2009 at 11:19 PM
yes everything was working and then it gave me a solid led light on the module, now only door locks work no remote start
Posted By: loneranger
Date Posted: March 09, 2009 at 1:44 AM
mjkurth72 wrote:
how do you get it out of valet mode, dont know that much that is why I ask
Flip the valet switch to the opposite position. ------------- Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.
Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?
Moral - Never dismiss the obvious.
Posted By: mjkurth72
Date Posted: March 09, 2009 at 6:01 AM
there is no valet switch on this model, remote start worked fine and now only door locks work, led only was on when you engaged the unit now it stays on all the time. need to reset the unit dont know how to do this
Posted By: loneranger
Date Posted: March 09, 2009 at 10:20 AM
According to this manual on page 27, there is a valet switch. ------------- Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.
Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?
Moral - Never dismiss the obvious.
Posted By: mjkurth72
Date Posted: March 09, 2009 at 3:03 PM
Thank-you for help. it was a push switch had to hold it THANKS A LOT MJKUERTH72
|