Print Page | Close Window

no accesory wire ?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=11227
Printed Date: July 19, 2025 at 4:02 AM


Topic: no accesory wire ?

Posted By: grundler1975
Subject: no accesory wire ?
Date Posted: March 21, 2003 at 3:34 PM

I have a 97bmw 328I convertible and there is no accesory wire to hook up the orange satellite relay to for the remote start. all accesories do come on when I try to remote start. Is this wire nessecary? There is nothing in the diagrams that shows and accesory wire is there?(I mean for the remote start relays not the rest of the car.)



Replies:

Posted By: auex
Date Posted: March 21, 2003 at 4:07 PM
If the vehicle has no wire at the ign harness then the computer probably turns it on, so then there is no need to wire the rs acc output to the car.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.




Posted By: grundler1975
Date Posted: March 21, 2003 at 6:50 PM
can I use that wire to run all of the alarm accesories that I bought like a 545t and a 530T? for the accesory turn on?




Posted By: auex
Date Posted: March 21, 2003 at 7:47 PM
Uh... those need to be hooked up to a constant source of power, unless you only want them to work when the remote start is active.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.




Posted By: grundler1975
Date Posted: March 21, 2003 at 10:30 PM
i thought a couple wires said accesory turn on but could be wrong




Posted By: auex
Date Posted: March 21, 2003 at 11:07 PM
The orange wire from the sattelite relay only provides power when the remote start is active. What you are probably thinking about is either the 2nd channel or channel 4 output(assuming your alarm is dei).

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.





Print Page | Close Window