dodge,chrysler

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=112337
Printed Date: July 18, 2025 at 7:38 PM

Topic: dodge,chrysler

Posted By: iteetwo
Subject: dodge,chrysler
Date Posted: March 13, 2009 at 9:18 PM

if you take the battery out of the factory remote will the transponder inside continue to work or does it need the battery to function

Replies:

Posted By: JWorm
Date Posted: March 13, 2009 at 9:28 PM

The transponder will still work without the battery.

Posted By: Mike M2
Date Posted: March 14, 2009 at 7:54 AM

I actually remove the board inside the remote for immobilizer programming. We use the 556CW and instead of doing it the way they describe(Deisel mode) i turn the 1st key on for 8 seconds, remove it, turn the second key in for 10 seconds, remove it, then turn the 1st key on again(without the board inside) while holding the pellet next to it. Works every time...

-------------
Mike M2
Tech Manager
CS Dealer Services

Posted By: fcss
Date Posted: March 14, 2009 at 9:16 AM

the battery is just for the keyless entry ,so like jworm said the transponder will still work

Posted By: iteetwo
Date Posted: March 14, 2009 at 7:12 PM

thanx for such quick answers

Print Page | Close Window