viper programming remote controls

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=112396
Printed Date: May 15, 2025 at 9:24 AM

Topic: viper programming remote controls

Posted By: ladiesman69
Subject: viper programming remote controls
Date Posted: March 15, 2009 at 9:56 PM

Hi

I am buying an extra remote control for my Viper 5901.

That way, I will have:
1 x two way remote
2 x one way remotes

The question is, when I do pairing the new remote control with the viper system, do I need to pair all three at the same or just pairing only the new one will do?

I read somewhere pairing will remove all previous memory of remote control so I was wondering if I pair only the new one that I just ordered, the original remote controls will not work after that?

Replies:

Posted By: howie ll
Date Posted: March 16, 2009 at 3:01 AM

Print Page | Close Window