Print Page | Close Window

2000 s-10 power window conversion

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=11240
Printed Date: March 29, 2024 at 7:23 AM


Topic: 2000 s-10 power window conversion

Posted By: pincky
Subject: 2000 s-10 power window conversion
Date Posted: March 21, 2003 at 6:47 PM

Hi there i have an 2000 s-10 with manual windows that i am converting to power...
and my Question is
i would like to use the factory switches if possable but to do it do need a new door panel that from an s-10 with factory switches? or is there a plate like the sliverado's that just unscrew?
your help would be great thanks!!
Vince



Replies:

Posted By: draasch
Date Posted: March 21, 2003 at 8:09 PM
i just did a 2000 about a month ago and no there is no plate. you have to use adtermarket switches or replace the door panels. what brand of windows are you using??

drop a line if you need help picking out some switches.

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt





Posted By: pincky
Date Posted: March 23, 2003 at 4:14 PM
i am using spal universal powered window switches




Posted By: draasch
Date Posted: March 23, 2003 at 6:55 PM
i used switch lit #33040147 and it worked great.
go to spal-usa.com and click on power windows. then click on switch kits. it will under the flush mount kits.
that will show you what they look like.

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt





Posted By: AlarmTech
Date Posted: March 25, 2003 at 12:23 AM
don't know if the kit # above refers to this kit or not, but the Spal Joker kit has "pods" for the switches, kinda goofy, but still OK. Painted to match they look much better. They can also potentially cover up the hand crank hole. I have done a few S-10's with the Euro trim rings and near flush switches, looks nice and clean. But i used Electric-Life OEM conversion kits.

But for top points, i would go for the clean factory look and get a powered S-10 door panels. or
cap the hand crank holes and go for a center console switch panel.


-------------
Viper Equipped





Print Page | Close Window